 Prime™
is the complete and concentrated conditioner for both
fresh and salt water. Prime™ removes chlorine,
chloramine and ammonia. Prime™ converts ammonia
into a safe, non-toxic form that is readily removed
by the tank’s biofilter. Prime™ may be used
during tank cycling to alleviate ammonia/nitrite toxicity.
Prime™ detoxifies nitrite and nitrate, allowing
the biofilter to more efficiently remove them. It will
also detoxify any heavy metals found in the tap water
at typical concentration levels.Prime™ also promotes
the production and regeneration of the natural slime
coat. Prime™ is non-acidic and will not impact
pH. Prime™ will not overactivate skimmers. Use
at start-up and whenever adding or replacing water.
Sizes:
50 mL, 100 mL, 250 mL, 500 mL, 2L, 4L, 20 L |
| |
DIRECTIONS:
Use 1 capful (5 mL) for each 200 L (50
gallons*) of new water. For smaller doses, please
note each cap thread is approx. 1 mL).
This removes approximately 0.8 mg/L ammonia,
1.2 mg/L chloramine, or 3.3 mg/L chlorine.
May be added to aquarium directly, but better
if added to new water first. If adding directly
to aquarium, base dose on aquarium volume.
Sulfur odor is normal. For exceptionally high
chloramine concentrations, a double dose may
be used safely. To detoxify nitrite in an emergency,
up to 5 times normal dose may be used. If temperature
is > 30
°C (86 °F) and chlorine or ammonia levels
are low, use a half dose.
500
mL treats 5000 gallons*. More than any other
de-chlorinator |
| |
|
| |
|
