Reef
Builder ™ raises carbonate alkalinity without
immediately impacting on pH. With long term use there
will be a tendency to stabilize at pH 8.3. Carbonates
and calcium are essential to all coral growth. If either
becomes deficient, coral growth will cease, followed
by a rapid decline in coral health. Used as directed,
Reef Builder™ will not deplete calcium, magnesium,
or strontium which usually tend to precipitate with
increasing alkalinity. Reef Builder™ and Reef
Buffer™ may be used together. Use Reef Builder™
to raise carbonate alkalinity without affecting pH.
Use Reef Buffer™ to raise carbonate alkalinity
and pH. 500 g treats 32,000 L (8,000 gallons).
.
Sizes:
250 g, 500g, 1 kg, 2 kg, 4 kg, 20 kg |
| |
DIRECTIONS:
BEGINNER: Use half a level teaspoon per 150
L (40 gallons) twice a week. Dissolve in at
least one cup of freshwater. Check alkalinity
every 2 weeks and adjust dose or frequency accordingly.
ADVANCED: Check alkalinity, then follow dosing
regimen above until alkalinity is adjusted to
4–5 meq/L. Each dose will raise alkalinity
by about 0.25 meq/L. Size or frequency of dose
can be adjusted, but do not exceed 1 meq/L per
day. Thereafter, use as required to maintain
alkalinity. EXPERT: After determining the alkalinity
consumption rate, set up a continuous drip system.
Use the following formula to determine how much
to add to your top-off water: t=0.05va (t=teaspoons
to add to top off water, v=volume of tank in
gallons, a=amount to raise alkalinity in meq/L).
For example, if you want to raise your alkalinity
by 1 meq/L in a 50 gallon tank, then you would
add 0.05x50x1=2.5 teaspoons into the top-off
water. HINTS: Use MultiTest:™ Marine pH
& Alkalinity to measure total alkalinity.
|
| |
|
|