CupriSorb

  • Powerful adsorbent of copper and heavy metals
  • Copper specific chelating resin
  • Removes all types of copper

CupriSorb™ is a powerful adsorbent of copper and heavy metals. CupriSorb™  will remove copper more rapidly and efficiently than carbon and is thus ideal for emergency copper removal. It extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous use, it will gradually extract even precipitated copper from the gravel/substrate bed as well. CupriSorb™ will allow maintenance of invertebrates in copper-treated tanks by removing copper leaching from substrates.

CupriSorb™ is a powerful copper specific chelating resin. Competing products are not chelating products, but merely cation exchange resins. Such resins can remove copper from freshwater but are ineffective in saltwater.

Sizes: 100 mL, 250 mL, 500 mL, 4 L

Use 250 mL for every 600 L (150 US gallons) to remove up to 7,500 mg (12 ppm) of copper. Use in filter media bag such as The Bag™. For best results, CupriSorb™ should be placed so as to maximize the flow of water through it. To remove undetectable substrate leaching copper keep CupriSorb™ in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter.

Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color. Use MultiTest™ Copper to monitor copper. When exhausted, CupriSorb™ may be discarded or regenerated.

REGENERATION: Soak in a non-metal container with 2 cups of water and 1⁄2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is best done outside and away from children. Soak for 1 hour, rinse well. Repeat as required to restore the original color. Rinse well, add sodium bicarbonate until foaming stops, and rinse again. CupriSorb™ is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate step, then regenerate as HyperSorb™ or Purigen®.

A: Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color. When exhausted, CupriSorb™ may be discarded or regenerated. Regenerate by soaking bag or beads in a non-metal container with 2 cups of water and 1/2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is better done outside and away from children. Soak for an hour, rinse well. Repeat as required to restore the original color. Rinse well, add backing soda (sodium bicarbonate) until foaming stops, and rinse again. CupriSorb™ is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate, then regenerate as HyperSorb™ or Purigen®. Use MultiTest: Copper to monitor copper.

A: No. The copper is not released until you regenerate it.

A: Most wet/dry filters have a drip plate on top of the biological media where the water enters the filter. That drip plate would be an ideal spot or anywhere that water will pass through the CupriSorb™

A: It can also remove cadmium and iron. It may also remove lead, but we do not have any data on lead removal so we cannot guarantee it.

It will also remove nickel, zinc, cobalt, cadmium, manganese. it may remove other heavy metals but we have no data for any others.

A: It is fine to leave CupriSorb™ in your filter for an extended period of time if you are afraid that there is some source of heavy metals leaching into your water. However, many heavy metals are actually essential to the health of fish, corals, and invertebrates in trace amounts. Leaving CupriSorb™ in your filter may eventually deplete these essential trace elements completely, so we do not recommend CupriSorb™ as a permanent addition to your filter.

Can't find what you're looking for? Ask us a new question. One of the experts from our technical support staff will be happy to promptly respond. You can also call 888‑732‑0003 (Monday- Friday 9:00 AM - 5:00 PM EST) if you would like to speak directly with a technical support representative.

0205 CupriSorb 100 mL
0206 CupriSorb 250 mL
0203 CupriSorb 500 mL
0209 CupriSorb 4 L