No announcement yet.

Search Result

9 results in 0.0118 seconds.
nitrate x

You can also choose from the popular tags.

  • 50 Gallon Fish tank Cycle using Prime/Stability?

    How do I cycle my 50-gallon fish tank using Prime/Stability? I did follow the instruction online about how to cycle but I have no luck for few days I started to see the presence of Nitrate which is 10ppm to 20ppm and my Ammonia is 0.50ppm 1.0ppm and Nitrite 0.50ppm 1.0ppm, I use 5 caps (5ml) overdose...
    See more | Go to post

  • Lower Nitrates without removing tannins (2 issues)

    Hi, hoping for some help and didn't see this combination of issue in your questions. I've bee using various products to lower Nitrates and just realized I think all of them also remove tannins, which I have been adding to lower the pH. Do you have any products that do that? Or recommendations?
    See more | Go to post
    Last edited by Carla; 02-05-2018, 23:06. Reason: Added tags

  • Willy94
    started a topic Seachem prime & stability.

    Seachem prime & stability.

    hi seachem, read Online about the two products with fish in cycle as I was too rush to buy 20-30 shrimps . Done a research and found out this two product to cycle my current shrimp tank .
    Day 1 : 0.5 ppm ammonia ( using api test kit )
    0 nitrites and nitrate .
    Day 2 : 1.0 ppm ammonia...
    See more | Go to post

  • tempura
    started a topic Seachem Matrix

    Seachem Matrix

    Hi Seachem Support,

    I have 55 gallon tank currently housing softies, LPS & 4 fishes. It is DSB.

    My feeding regime is heavy.

    My latest measurement (16-02-2015) is 80 ppm of No3.

    I am currently dosing Red Sea No3Po4x 6 ml daily and have been...
    See more | Go to post

  • turntablez
    started a topic Matrix vs Pumice

    Matrix vs Pumice


    I was wondering if Seachem can clarify a few things about Matrix. I have been investigating and some believe that Seachem Matrix is just cleaned sterilized Pumice. Is this true? If so do you add something to it so it denitrifies Ammonia, Nitrite, and Nitrate? I would rather...
    See more | Go to post

  • Twisted
    started a topic Denitrate reactor

    Denitrate reactor

    I have filled a phosban reactor with denitrate and tank water, then added stability. I let the reactor sit for 3 days then hooked it up to a pump. I set the flow rate to well below 50gph. The water coming out of the reactor was reading 5ppm nitrate, while the tank was reading 10ppm. Like an idiot I...
    See more | Go to post

  • tweakz20
    started a topic Nitrogen question

    Nitrogen question

    My tank's always reading 0 ppm nitrate and I only recently started dosing Flourish Nitrogen at the amount required to raise Nitrate to 10 ppm. However, after 1 day and no water change, the tank went from 10 ppm to 0 ppm. I'm guessing this is a slap you in the face sign of nitrogen deficiency?...
    See more | Go to post

  • hierholzerm
    started a topic Thank you!

    Thank you!

    I just want to say a big thank you to everyone in the Seachem community and company! I had a huge Nitrate and Nitrite spike the beginning of last week and I had no idea how to deal with it. However, after reading posts on here about all of your experiences and the help Seachem provided you I can tell...
    See more | Go to post

  • Ideal additive for RO/DI water for freshwater

    My L.A. County tapwater is very hard (8dKH, 12dGH), alkaline (pH=8++), has recently been turning in about 20ppm of Nitrates and God knows how much of phosphates and silicates. With fishload, even with a planted tank, I'm hard pressed to maintain 40ppm of NO3 (API test), so my shrimp (especially...
    See more | Go to post